MIL-DTL-18295F
6.2.1 Part identification number (PIN). A PIN has been established to facilitate procurement of a
mixture of components by a self-constructed part ordering number (see 1.2).
Example:
M18295-I-2-2
Chain size (2 inch (51 mm)).
Chain type (type 2, chain link without cathodic
protection).
Group (group I).
Military specification designator.
6.3 Definitions.
Chain assembly - Consists of the riser and ground leg subassemblies which contain all of the chain,
connecting links, and other mooring material (except buoys, anodes, and anchors) which comprise
a fleet mooring (see 1.2).
Compatibility - When mated, components should provide sufficient clearance for assemblies and
proper grip area for each component (see 3.3.7.1).
Component - Any part of the mooring chain assembly such as a shot of chain, detachable link,
ground ring, etc. (see 3.2.1).
Ground leg subassembly - Typically, 18 shots of chain, 8 anchor joining links, 25 detachable
joining links, and three swivels (including spares) (see 3.1).
Nominal diameter - The associated chain size in which the loading criteria applies (see 3.3.1).
Riser subassembly - Typically, one shot of chain, three anchor joining links, three detachable
joining links, one swivel, and one ground ring (including spares) (see 3.1).
Shot - 90 feet (27.4 m) of chain which should contain links with an enlarged link and end link at
each end or all common links as specified by the contracting officer (see 3.2.1).
6.4 Subject term (key word) listing.
Chain assembly
Lead
Mooring chain
Zinc chromate
18
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business