MIL-DTL-2710C
ASTM INTERNATIONAL
ASTM A275/A275M
- Standard Practice for Magnetic Particle
Examination of Steel Forgings
ASTM A322
- Standard Specification for Steel Bars, Alloy,
Standard Grades
ASTM A370
- Standard Test Methods and Definitions for
Mechanical Testing of Steel Products
ASTM A580/A580M
- Standard Specification for Stainless Steel Wire
ASTM A581/A581M
- Standard Specification for Free-Machining
Stainless Steel Wire and Wire Rods
ASTM A582/A582M
- Standard Specification for Free-Machining
Stainless Steel Bars
(Copies of these documents are available online at https://www.astm.org/ or from ASTM
International, 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428-2959.)
2.4 Order of precedence. Unless otherwise noted herein or in the contract, in the event
of a conflict between the text of this document and the references cited herein, the text of this
document takes precedence. Nothing in this document, however, supersedes applicable laws and
regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 First article. When specified (see 6.2), a sample shall be subjected to first article
inspection (see 6.3) in accordance with 4.2.
3.2 Material. Material for the detachable link components shall be as specified in 3.2.1
through 3.2.4. Material used in normal production shall be the same composition as material
used for first article sample in chemistry, quality, and properties.
3.2.1 C-link and right and left hand coupling plates. Steel used in the manufacture of the
C-link and coupling plates shall be forged from alloy steel as specified in table I.
3.2.1.1 C-link and coupling plate material chemical composition. The chemical
composition of the steel of the C-link and coupling plates shall conform to the chemical
composition of the American Iron and Steel Institute (AISI) alloy steel grades specified in table I
(see 4.5.1).
3.2.2 Taper pin. The taper pin shall be machined from type 416 stainless steel. The
finished taper pin shall conform to ASTM A582/A582M, condition H.
3.2.2.1 Taper pin material chemical composition. The chemical composition
of the stainless steel of the taper pin shall conform to the chemical composition of type 416
stainless steel in accordance with ASTM A582/A582M (see 4.5.1).
4
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business