MIL-DTL-2710C
Class 3 - High strength
Sizes:
3/4 inch; 7/8 inch; 1 inch; 1-1/8 inch; 1-1/4 inch; 1-1/2 inch; 1-3/8 inch;
1-5/8 inch; 1-3/4 inch
Type II - Pear-shaped
Sizes:
Number 2:
3/4 - 7/8 inches
Number 3:
1 - 1-1/8 inches
Number 4:
1-1/4 - 1-1/2 inches
Number 5:
1-5/8 - 2 inches
Number 6:
2-1/8 - 2-3/8 inches
Number 7:
2-1/2 - 3-1/8 inches
Number 8:
3-1/4 - 3-1/2 inches
1.3 Detachable link components. Detachable links consist of the following components
(see figure 1 and figure 2):
a. C-link.
b. Coupling plate - right hand.
c. Coupling plate - left hand.
d. Taper pin.
e. Hairpin (hairpin will be furnished only for detachable links used in an outboard
swivel shot (see 6.2)).
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents cited in other sections of this specification or
recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all specified
requirements of the documents cited in sections 3 and 4 of this specification, whether or not they are
listed.
2.2 Government documents.
2.2.1 Specifications and standards. The following specifications and standards form a
part of this document to the extent specified herein. Unless otherwise specified, the issues of
these documents are those cited in the solicitation or contract.
FEDERAL SPECIFICATION
VV-G-632
- Grease, Industrial, General Purpose
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business