INCH-POUND
MIL-DTL-3903F
17 May 2013
SUPERSEDING
MIL-DTL-3903E
27 October 2009
DETAIL SPECIFICATION
WIRE ROPE ASSEMBLIES, SINGLE LEG,
(SLING TYPE)
Reactivated after 27 October 2009 and may be used for new
and existing designs and acquisitions.
This specification is approved for use by all Departments and Agencies of the Department
of Defense.
1. SCOPE
1.1 Scope. This specification covers wire rope assemblies, single leg with plain end
loops.
1.2 Classification. The wire rope assemblies are of the following types and classes, as
specified (see 6.2):
Type I
-
Hand splice, wire rope, improved plow steel, fiber core
Type II
-
Mechanical splice, wire rope, improved plow steel, independent wire rope
core
Class 1
-
6 by 19 (RR-W-410, Type I, Class 2, assemblies with wire rope diameter
of 1-1/8 inch and under)
Class 2
-
6 by 37 (RR-W-410, Type I, Class 3, assemblies with wire rope diameter
of 1-1/4 inch and over)
Comments, suggestions, or questions on this document should be addressed to Defense Logistics
Agency Aviation - VEB, 8000 Jefferson Davis Highway, Richmond, VA 23297-5616, or e-
mailed to STDZNMGT@dla.mil. Since contact information can change, you may want to verify
the currency of this address information using the ASSIST database at https://assist.dla.mil/.
AMSC N/A
FSC 4010
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business