INCH-POUND
MIL-DTL-2902E
26 October 2009
SUPERSEDING
MIL-W-2902D
23 December 1988
DETAIL SPECIFICATION
WIRE ROPE LANYARD, SINGLE LEG,
OXYGEN BREATHING APPARATUS
SAFETY LINE
Reactivated after 26 October 2009 and may be used for new
and existing designs and acquisitions.
This specification is approved for use by all Departments and Agencies of the
Department of Defense.
1. SCOPE
1.1 Scope. This specification covers a safety line between an oxygen breathing
apparatus user and his tender.
1.2 Classification. The safety lines are of the following types, as specified (see 6.2):
Type I - Corrosion resistant steel
Type II - Phosphor bronze
1.3 Part or identifying number (PIN). The PIN to be used for safety lines acquired to
this specification is created as follows:
M 2902 - X
Type:
1 - I - Corrosion resistant steel
2 - II - Phosphor bronze
Specification number
Denotes military specification
Comments, suggestions, or questions on this document should be addressed to Defense Supply
Center Richmond, ATTN: DSCR-VEB, 8000 Jefferson Davis Highway, Richmond, VA 23297-
5616, or e-mailed to STDZNMGT@dla.mil. Since contact information can change, you may
want to verify the currency of this address information using the ASSIST database at
https://assist.daps.dla.mil/.
AMSC N/A
FSC 4010
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business